Recycling
THE RANGE
Fortress by Shearcore – Steel Shears
Discover the ultimate in precision and durability with the Fortress FS Series Excavator Steel Shear, your go-to solution for unmatched performance in demolition and cutting tasks. Engineered with cutting-edge American craftsmanship, the FS Series stands out with its innovative design that optimises strength-to-weight ratios, ensuring maximum efficiency without sacrificing quality.
Each shear is built with easy maintenance and operator convenience in mind, featuring large removable panels for quick component access and a robust construction that dramatically improves both performance and durability. Whether you’re tackling tough metals or intricate demolition projects, the FS Series provides the reliability and power needed to get the job done right. Available exclusively at Boss Attachments, with easy financing options to meet your business needs, this attachment isn’t just a tool—it’s an investment in peak performance and lasting success.
LEOTECH Dust Canon
A nebulised jet dust suppression machine, provided with an internal combustion engine driving a high pressure pump. High pressure water is delivered to a spraying head with up/down and left/right electrically operated movements. The water jet is released at a proper height for safety reasons and to not disturb the operators on site.
MOTOFOG just needs a water supply to be ready to work. The operating costs are greatly reduced, because there is no need for additional power generators. The transport costs are as well reduced, thanks to its lightweight and compactness.
MOTOFOG with DUAL JET is a highly flexible solution which suits operator’s needs perfectly. The provided nozzles, through a simple operation, allow the selection of different spray patterns which can deliver either the long range or a wide coverage, according to the specific needs.
Xcentric Crusher Bucket
Xcentic didn’t invent the crusher bucket – they perfected it. Features include isolating jaw system that improves production by 35%.
Designed and manufactured in Spain by Xcentric using only the best materials to ensure consistent quality and performance.
Solid, durable, characterized by the recognizable clean lines designed to resist wear and high stresses in the toughest working conditions.
Extremely compact and low centre of gravity improves balance and drastically reduces the strain on the excavator arm, eliminating impact vibrations.
Sterling Technology Sterling Hammer
The Sterling Hammer delivers faster and more powerful performance than conventional vibratory hammers.
This is due to its larger, centrally positioned eccentric weight that enables quicker pile penetration and extraction.
The 360‑degree hydraulic rotational mounting system provides excellent maneuverability and control on the job site.
Built with a durable bearing structure and a rigid rubber cushion, the Sterling Hammer is designed for long‑term reliability while keeping maintenance simple and cost‑effective.
Easy installation and straightforward operation make it a practical, high‑performance solution for a wide range of piling applications.
Sterling Technology Pile Driver – SG-W
Sterling Technology pile drivers are engineered for versatility and performance.
The Sterling ‘W’-type side clamping system features a robust ‘W’-shaped clamp structure that delivers strong gripping force and ensures precise, accurate side clamping.
The Sterling ‘W’-type side clamping system features a robust ‘W’-shaped clamp structure that delivers strong gripping force and ensures precise, accurate side clamping
Sterling Technology Pile Driver
Sterling Technology pile drivers are engineered for versatility and performance.
Supporting a wide range of pile types, including sheet piles, H‑beams, I‑H beams, and round piles, excel in low‑headroom and confined‑space job sites. This can also be attributed to the precise 360‑degree swivel side‑clamping that ensures accurate gripping.
With larger, double eccentric weights, the machinery delivers faster and more powerful penetration and extraction than typical side‑grip drivers. The design emphasises durability, low maintenance, and long service life, supported by balanced counterweights and a rigid rubber cushion.
Sterling Technology Auto Tilt Hammer
The Sterling Technology Auto Tilt Hammer is engineered to deliver safer, more efficient pile‑handling performance. With a 90‑degree tilt capability combined with full 360‑degree hydraulic rotation, it allows operators to position piles with greater control and speed.
The built‑in Auto Hold feature secures the hammer at a 90‑degree tilt, enhancing stability and safety during operation.
A durable bearing structure and rigid rubber cushion ensure long‑term reliability, while the hammer design emphasizes low maintenance, easy servicing, and straightforward installation and operation.
The Auto Tilt Hammer provides a robust, user‑friendly solution for demanding job‑site conditions.
DYMAXINC RAIL Ballast Blaster
Engineered for pin grab quick couplers, the DymaxRail Ballast Blaster Undercutter is built to tackle the toughest track maintenance jobs. Featuring an advanced, patented design, this rugged attachment cuts and pulls fouled ballast rock and mud out from beneath the tracks quickly and efficiently — restoring drainage and track stability with minimal downtime.
Compatible with Railway Excavators and Backhoe Loaders fitted with a traditional pin-grab coupler system, the Ballast Blaster comes with built-in rotation and tilt for precise positioning on every job. Built tough for the demands of rail maintenance, it’s the go-to solution for contractors who need reliable, high-performance undercutting.
Dymax Rail Attachments for construction equipment machines are designed to provide high productivity and long lasting performance in railroad maintenance. Dymax Rail designs innovative equipment for railroads, mass transits and contractors working in the railroad industry.
BOSS ATTACHMENTS Rock Breaker
Our hydraulic breakers are the gold standard for heavy-duty tasks. With exceptional power and reduced operating costs, they are perfect for quarry, demolition, and earthmoving. Choose the best for your toughest jobs.
BOSS ATTACHMENTS Trench Bucket
Trenching buckets, also known as trenching attachments, are narrower than standard buckets.
Applications:
- Utility trenching
- Narrow excavation
- Cable and pipeline installation
Antraquip Drum Cutter – Transverse
Antraquip Hydraulic Cutters are the solution for your next project involving trenching, general rock excavation, controlled demolition, scaling, profiling, soil remediation, frozen ground cutting, tunneling, rock dredging, and many other applications.
Antraquip Hydraulic Rotation Units
Antraquip offers a full range of hydraulic rotation units that enable the attachments to be hydraulically rotated 360 degrees to cut tunnel profiles, difficult to reach areas, and increase precise cutting capabilities on the most challenging jobsites
Antraquip Cutters are powerful attachments that can excavate rock and concrete efficiently while limiting noise and vibrations.
AQ Cutters offer excellent production rates for rock excavation and concrete removal/ demolition while providing precise cutting control
Antraquip Drum Cutter – Axial (inline)
Axial cutters utilise a single drum design and are most utilised for narrow trench excavation, cutting of concrete piles, remediation, profiling, scaling and other projects that require extraordinary cutting precision.
Antraquip Axial cutters utilize a single drum design and are most commonly utilized for narrow trench excavation, cutting of concrete piles, remediation, profiling, scaling and other projects that require extraordinary cutting precision.
Cutter attachments are available for excavators or other hydraulic carriers in the 3-50t weight class.
Antraquip Diamond Saw
Diamond Saw offers a solution for cutting hard rock that other methods of mechanized excavation can simply not handle. The AQD series can cut the hardest rock, including granite, basalt, etc., as well as reinforced concrete. Certain steel cutting can also be performed with these saws.
Diamond saw rock wheel attachments, also known as the AQD Series, can cut the hardest rock including granite, basalt, etc. as well as reinforced concrete.
Antraquip Carbide Saw
Antraquip Carbide Saws offer a rock/concrete cutting solution for soft to medium hard rock with a minimum width of roughly 4-inches (100mm). With dual motor setup these carbide saws provide a tremendous amount of torque and cutting force concentrated on the blade/wheel. Capable of cutting hard rock or reinforced concrete, these attachments are common for narrow trenches and demolition applications.
Antraquip Soil Mixers
A variety of soil mixing and remediation head options are now available depending on project conditions and requirements. Antraquip soil mixing attachments can be supplied with customized extensions to help protect hydraulic hoses and incorporate hard lines for required additives needed for remediation and/or soil stabilization.
The method utilizing Antraquip mixers relies on thoroughly mixing binders into subject material while the material remains in-place or in situ.
Soil Mixing is quick and cost effective compared to other methods such as: excavation and replacement of incompetent soil or compaction by surcharge. Treated ground can be accessed with heavy equipment in as short a time as one day.
CIVIL ENGINEERING USES OF SOIL MIXING
- Stiffening of pavement and rail subgrades
- Stabilization of embankments
- Protection of adjacent structures from transmitted vibration
- Low permeability ground water protection layers
- Reduction of soil hydraulic conductivity
- Erosion control
- Protection layers for permafrost and frost
ENVIRONMENTAL ENGINEERING USES OF SOIL MIXING
- Reuse of dredged material management areas for infrastructure development
- Treatment of dredge within barges producing engineered fill
- Recycling of the industrial by-products
- Solidify free-liquids
- Increase compressive strength
- Reduce hydraulic conductivity
- lnsitu solidification/stabilization (ISS)
- Immobilize hazardous constituents
Antraquip Chain Cutter
Antraquip chain cutters are built for narrow trenching applications that require control, consistency, and minimal excavation. These attachments use mechanized cutting technology to create straight, uniform trenches without side-to-side movement.
Designed for continuous operation, chain cutters perform effectively in soft to medium-hard rock where trench width, geometry, and material removal must be tightly managed.
BOSS ATTACHMENTS Grab Bucket
The Boss HD Hydraulic Bucket Grapples are designed and Built for land clearing, Waste Materials Handling, Demolition & Rock Break Wall Construction applications throughout Australia, USA, Canada & Italy.
Designed & manufactured with Extreme Closing Pressures to ensure minimal load loss, and Widest Jaw Opening in its class which improves operator productivity. Fully Plumbed Australian Made Cylinders for peace of mind. Hardened Pins & Bushes to ensure longevity of the product.
Boss HD Hydraulic Bucket Grapples are manufactured with thicknesses, reinforcements and components suitable to increase its sturdiness and durability.
BOSS ATTACHMENTS Mud bucket
A wide, deep bucket with a double-edged bolt-on cutting blade, built to move large amounts of materials quickly and efficiently.
Boss Mud Buckets are manufactured with thicknesses, reinforcements and components suitable to increase its sturdiness and durability, employing additional external reinforcing bands to the outside of the roll, with the addition of Boss Super Series cutting edge made from hard composite materials which guarantee exceptional performances & proven reliability.
13t, 20t, 30t, 40t & 60t Mud Buckets are available now!
OSA Demolition Demolition Steel Shears – SH
Introducing the OSA Demolition Steel Shears SH, exclusively available from Boss Attachments. These premier tools are the ultimate choice for the most demanding demolition tasks, offering unparalleled strength and optimal weight thanks to their cutting-edge design and premium materials.
The SH Series steel shears have been designed for demolishing iron structures and cutting structural steels, pipes, tanks, sheets and iron cases.
Asphalt Zipper Inc Road Reclaimers
The Asphalt Zipper is the most cost-effective and productive way to repair roads and open utility trenches in asphalt. A very powerful road reclaimer, it is designed to pulverize asphalt and chip seal roads and surfaces, turning them into reusable spec-comparable road base material in minutes. Asphalt Zipper is also an impressive utility trencher, virtually eliminating the time and costs involved with saw-cutting, chunking, and hauling away asphalt from utility trenching.
Antraquip Patch Planers
These machines are dedicated to working on asphalt and concrete surfaces for maintenance and resurfacing of roadways, concrete floors, and walls. Antraquip patch planers are available to be mounted on excavator backhoe loaders in the 5-25t weight classes.
Recommended excavators/carrier size class: 6-25 tons
OSA Demolition Multisystem – MC
The O.S.A MC Series from OSA is by far the most technologically advanced universal attachment on the market today. Designed to perform at its best in extreme primary and secondary demolition applications, the MC is a must have for any serious contractor.
BOSS ATTACHMENTS Heavy Duty Rock Bucket
All our digging buckets come complete with teeth, bolt-on side cutters and pins. Check out our HD range, built specifically for the mining sector.
OSA Demolition Primary Demolition – RS
The OSA RS Series is engineered to meet all your primary demolition needs with unmatched precision and efficiency. These dual-cylinder demolition shears are designed to excel on any site, featuring advanced capabilities that set them apart in the industry. Perfect for primary demolition tasks, they provide the reliability and performance you need to get the job done right.
BOSS ATTACHMENTS Sieve Bucket
Features a high-tensile bar and fully fabricated interlock rib construction for maximum strength. Optional teeth and adaptors available on request. Check out our HD range, built specifically for the mining sector.
BOSS ATTACHMENTS Screening Bucket
Designed for primary screening of scrap material, demolition material, filling material for excavations, and material resulting from the reclamation of rocky soil.
Constructed entirely from SSAB HARDOX and STRENX materials. Designed and manufactured in Italy exclusively for Boss Attachments.
OSA Demolition Rotating Selector Grabs – GR
Optimise your material handling with the OSA GR Series waste grapple, featuring a 360-degree rotation for precise control. Medium to large models include dual hydraulic motors to maximise rotational torque and minimise strain, with a rotation valve to protect the motor from pressure surges.
OSA GR Grapples are made with resistant, anti-wear steel and make light work of demolition jobs with wood, bricks and other materials.
OSA Rotating Selector Grabs are designed and built tough, able to tackle the hard jobs and easily select demolished material to facilitate recycling.
BOSS ATTACHMENTS Tilt Bucket
Like the mud bucket, with the added feature of tilting 45 degrees left to right, making it the operators bucket of choice for intricate detailed work.
Features 45 degree tilting, and large-capacity, heavy-duty twin cylinders with cylinder guards, bolt-on double-sided cutting edge.
Extremely high-grade construction that’s built to last.
Available in 13 tonne, 20 tonne, 30 tonne and 40 tonne capacity.
OSA Demolition Secondary Demolition Pulverizers – FPV
The FPV series pulverizers are for ground works, satisfying all secondary demolition needs including recycling and pulverization.
Designed for optimal secondary demolition tasks, the FPV pulverisers offer unparalleled performance and durability. Their HARDOX structure and reversed cylinder design protect vital components, while interchangeable teeth and blades extend their usability.
BOSS ATTACHMENTS Ripper
A single-shank attachment for ripping operations or prying rocks. Optimum balance and positioning. Check out our HD range, built specifically for the mining sector.
OSA Demolition Demolition Tree Shear – LIV
Designed for ultimate durability and performance, our tree shear attachment is a leader in forestry management tools. Fabricated in Italy and perfected with Australian ingenuity by Kevin Curran, formerly of Ironbark, this attachment is built to tackle the rigorous demands of tree removal and land clearing.
Boss ATTACHMENTS Tree Shears
Boss Mechanical Tree Shears for 20-60t are designed for forestry in primary and secondary applications with extreme efficiencies and the most powerful power to weight ratio.
Manufactured by Boss Global Italy with HARDOX 450 to resist wear and tear. The unique design of cutting blade and beak allows the shear to easily cut and rip into large trees for easy loading into tub grinders or stock piles. The jaw of the cutter is powered by the bucket cylinder, with no hydraulic connections or installation kits needed.
20t, 30t, 40t & 60t options are in stock now.
BOSS ATTACHMENTS Root Rake
Forestry spec Stick Rake built tough using 350 & 400 Hardox to withstand the hardest jobs and harshest of conditions.
BOSS ATTACHMENTS Grapple
BOSS HD Hydraulic Rotating Grapples for 4-50 Tonne Excavators Built Tough By BOSS using Hardox & 400UTS High Strength Steels to withstand the harshest of conditions. The hardness & design of the structure absorbs extreme strains when it is subjected to excessive stresses.
The Boss HD Hydraulic Rotating Grapples are designed and Built for land clearing, Waste Materials Handling, Demolition & Rock Break Wall Construction applications throughout Australia, USA, Canada & Italy.
Designed & manufactured with Extreme Closing Pressures to ensure minimal load loss, and Widest Jaw Opening in its class which improves operator productivity. Fully Plumbed Australian Made Cylinders for peace of mind. Hardened Pins & Bushes to ensure longevity of the product.
Boss HD Hydraulic Rotating Grapples are manufactured with thicknesses, reinforcements and components suitable to increase its sturdiness and durability.
BOSS ATTACHMENTS Telescopic Excavator Arm
Step into a new era of excavation efficiency – introducing the BOSS EXTRACTOR Series, the pinnacle of safety and technological advancement. Designed to redefine productivity in the industry, this telescopic clamshell boasts unparalleled extraction rates and safety standards. Experience the future of excavation technology – experience the BOSS EXTRACTOR Series.
Xcentric Ripper
The Xcentric Ripper is a hydraulic excavator attachment designed for the mass extraction of rock in mining and civil applications.
It has been developed with a patented system of ”Impact Technology by accumulation of energy”, which in most instances makes the Xcentric Ripper up to 5 times more productive than hydraulic breakers.
The all new Xcentric Ripper ”Mining Series” is focused on mining applications where the highest production values are required, as well as continuous work shifts where reliability and excavator operator comfort are paramount.
DYMAXINC TREE SHEAR
A Dymax Excavator Tree Shear is the perfect tool for forest utility work, hazardous fuel removal from forest lands, plantation thinning of acacia and eucalyptus, biomass fuels production and trimming limbs and trees for roadside maintenance and site development or alongside railroad tracks.
DYMAXINC RAIL RAIL RIDER
From embankments to under bridges, take your excavator to hard-to-reach locations with the Dymax Rail Rider MPX.
Unlike any other equipment in the market, the Rail Rider MPX eliminates the need for undercarriage alterations. Use your existing excavator without limiting yourself to a rail-only gear installation. The Rail Rider MP works on multiple brands of excavators and allows you to retain your equipment’s original value. Switch your equipment without spending more money on a new conversion kit or high cost, permanent machine modifications.
Gauss Magneti Hydraulic Circular Electromagnetic Lifter
Discover unparalleled efficiency in steel and iron handling with our Hydraulic Magnet – the ultimate all-in-one solution engineered for heavy-duty tasks.
Gauss Magneti Electro permanent magnets are particularly suitable for the handling of long flat products and remain magnetised even if there is no mains voltage or in the event of a cable breakage.
Typical uses include the handling of Billets, Slabs, Single Sheets, Single Tubes, Single Rounds, Single Beams, Single Rails and Cold Rolled Coils both horizontally and vertically.
Our Hydraulic Magnet is a compact all-in-one unit for heavy duty steel and iron handling.
Walk n Roll Grader Retriever Disc
The retriever grader is an all in one shoulder conditioning tool that saves money and time.
Available in either a Wing Mount or Side Mount:
| Wing Mount System
– mounts to existing side Grader snow wing |
| Front-Mount System
– the ultimate efficiency – 2 operations in one pass |
Walk n Roll Retriever Disc Tractor
Walk ‘N’ Roll is worth it’s weight in gold.
Within the first 6 weeks it was obvious that the Walk ‘n’ Roll was saving us huge amounts of money.
After a 4 month term we purchased it outright and over the term of the contract it has already paid for itself.
The Walk ‘n’ Roll has been worth its weight in gold. It is easy to maneuver and compacts almost as well as a standard 7-ton roller. Since we’ve started using the Walk ‘n’ Roll we’ve had almost no complaints about potholes or other surfacing problems. The means the equipment has been the right thing for us – and it is also saving the ratepayers huge amounts of money.
Walk n Roll Roller Packer
With thousands commissioned around the world, the Walk ‘n’ Roll packer is the global leader for unsealed road compaction.
Walk ‘n’ Roll enables grading and road compaction in a single operation, providing massive cost savings for unsealed road maintenance. Easy to manoeuvre and compact, potholes and similar surfacing problems are no competition to the roller.
Walk n Roll WR75
Walk ‘N’ Roll is worth it’s weight in gold.
Within the first 6 weeks it was obvious that the Walk ‘n’ Roll was saving us huge amounts of money.
After a 4 month term we purchased it outright and over the term of the contract it has already paid for itself.
The Walk ‘n’ Roll has been worth its weight in gold. It is easy to maneuver and compacts almost as well as a standard 7-ton roller. Since we’ve started using the Walk ‘n’ Roll we’ve had almost no complaints about potholes or other surfacing problems. The means the equipment has been the right thing for us – and it is also saving the ratepayers huge amounts of money.
Walk n Roll WR90
Walk ‘N’ Roll is worth it’s weight in gold.
Within the first 6 weeks it was obvious that the Walk ‘n’ Roll was saving us huge amounts of money.
After a 4 month term we purchased it outright and over the term of the contract it has already paid for itself.
The Walk ‘n’ Roll has been worth its weight in gold. It is easy to maneuver and compacts almost as well as a standard 7-ton roller. Since we’ve started using the Walk ‘n’ Roll we’ve had almost no complaints about potholes or other surfacing problems. The means the equipment has been the right thing for us – and it is also saving the ratepayers huge amounts of money.
Walk n Roll WR90 Oscillator
Walk ‘N’ Roll is worth it’s weight in gold.
Within the first 6 weeks it was obvious that the Walk ‘n’ Roll was saving us huge amounts of money.
After a 4 month term we purchased it outright and over the term of the contract it has already paid for itself.
The Walk ‘n’ Roll has been worth its weight in gold. It is easy to maneuver and compacts almost as well as a standard 7-ton roller. Since we’ve started using the Walk ‘n’ Roll we’ve had almost no complaints about potholes or other surfacing problems. The means the equipment has been the right thing for us – and it is also saving the ratepayers huge amounts of money.
Fortress by Shearcore – Concrete Shears
FORTRESS FC SERIES DEMOLITION SHEAR SERIES/CONCRETE PROCESSOR
The Fortress Demolition Shear series excels in both primary and secondary demolition tasks.
As a manufacturing partner of OilQuick Americas, you can effortlessly integrate your Fortress attachment with OilQuick’s automatic quick coupler. This combination enables rapid switching between application-specific attachments in mere seconds.